Angle

Angle

We offer steel angles that are made with very close tolerances and exact mechanical properties. Available in smooth and continuous surface finishes. We have these in namely Mild Steel Angles(MS Angles) & High Tensile Angles used in communication and transmission towers.
Approval from Power grid Corporation of India ltd (PGCIL) For MS & HT Angles upto 130×12 mm.

Size: 25 x 25 mm x 3 mm to 200 x 200 x 20 mm

Grade: IS 2062

MS Equal Angles

35×35 mm upto 150×150 mm and thickness from 4 mm up to and including 20 mm as per Grade E250 A & Grade E350 A

Thickness (mm)
LEG (mm)	4	5	6	7	8	10	12	16	20
ISA 35×35	2.1	2.6	3.0
ISA 40×40	2.4	3.0	3.5
ISA 45×45	2.7	3.4	4.0
ISA 50×50	3.0	3.8	4.5	5.15
ISA 55×55	3.3	4.1	4.9		6.4	7.9
ISA 35×35	2.1	2.6	3.0
ISA 60×60	3.7	4.5	5.4		7.0	8.6
ISA 65×65	4.0	4.9	5.8		7.7	9.4
ISA 70×70		5.3	6.3	7.38	8.3	10.2
ISA 75×75		5.7	6.8			8.9	11.0
ISA 80×80			7.3		9.6	11.8	14.0
ISA 90×90			8.2		10.8	13.4	15.8
ISA 100×100			9.2	10.7	12.1	14.9	17.7
ISA 110×110					13.4	16.6	19.7	25.7
ISA 130×130					15.9	19.7	23.5	30.7
ISA 150×150							22.9	27.3	35.8	44.1

MS Unequal Angles

45x30mm thickness from 4 mm upto and including 6 mm as per Grade E 250A & Grade E 350A

Thickness (mm)
LEG (mm)	4	5	6	7	8	10	12	16	20
ISA 45X30	1.9	2.4	2.8

Rolling and Cutting Tolerance

LEG LENGTH	SECTIONAL WEIGHT	LENGTH
Up to 45 mm: +/- 1.5 mm		FOR FIX LENGTH
45 to 100 mm:+/- 2 mm	over 3 mm :+5% -3%	:+/- 100 MM
above 100 mm:+/- 2 %

Chemical Composition

GRADE	C %	Mn %	S %	P %	Si %	CE VALUE
MS E-250 A	0.23	1.50	0.045	0.045	0.40	0.42
HT E-350 A	0.20	1.55	0.045	0.045	0.45	0.47
Tolerance	0.02	0.05	0.005	0.005	0.03	0.03

Mechanical Properties

	Tensile Strength	Yield Stress	% Elongation at	Bend Test
	MIN, MPA	MIN ,MPA			GAUGE LENGTH 5.65	MIN
MM		<20	20-40	40	MIN
MS E-250 A	410	250	240	230	23	2t
HT E-350 A	490	350	330	320	22	2t
Tolerance

MS Equal Angles

MS Unequal Angles

Rolling and Cutting Tolerance

Chemical Composition

Mechanical Properties

Reviews

Related products